Vastex
PTF-100 DTF Powder-To-Film Applicator and D-100 Dryer Combo
PTF-100 DTF Powder-To-Film Applicator and D-100 Dryer Combo - 110 V
SKU:
The Vastex PTF-100 DTF Powder-to-Film system and D-100 Dryer Combo not only uniformly coats DTF films with adhesive powder but also cures it all in one! Completely eliminate dusting and spillage along with reducing waste while improving DTF printing performance and operator safety.
To operate, a filled cartridge is inserted at the top of the unit, and an empty cartridge at the bottom. An operator positions the wet DTF printed film on the application tray, print side up. Once the polycarbonate door is closed tightly, the operator can adjust the angle of the powder deflector and the amount of powder to be released.
With each cycle, the user pulls a lever to release the desired amount of powder, then pushes it to start the timer/vibration. The top cartridge releases adhesive powder which rains down on the film, ensuring complete and even coverage. When empty, the upper cartridge can be switched quickly and cleanly with the lower cartridge containing all excess powder, reducing exposure while eliminating waste and allowing continuous production until refilling is needed.
Features:
- Fits up to 16" x 20" film sheets
- Adjustable timer
- Sealed for mess-free operation
- Interchangeable cartridges for quick and clean refills.
- D-100 conveyor dryer for consistent curing
- Exhaust hood to remove fumes while curing
*Lead times vary based on stock availability
Product Resources
Dryer Features And Highlights
-
SMART
Teflon coated fiberglass belt with tracking system
-
BELT WIDTH
(max garment width)
18" (46 cm) -
HEATER WIDTH
16" (41 cm)
-
ADJUSTABLE
Speed, temperature, heater height and tilt
-
FAST
110+* shirts per hour with plastisol and 50+* with discharge
-
PRECISE
Powerful infrared heater with tight coil pattern and heat shields
-
VALUABLE
Best warranty, high quality, exceptional service
-
COMPACT
Total footprint is less than 8 sq.ft (2.44 sq.m)
Additional Information
- Voltage: 110V
- Max Media Width: 16 to 20 in sheets
- Shipping Dimensions: 30" x 25" x 39"
- Shipping Weight: 140 lbs
- Machine Dimensions: 31"(H) x 23.5"(W) x 23"(L)
- Machine Weight: 70 lbs
Variable controls for both heat intensity and conveyor speed allow fine-tuning of the drying process according to ink type, ink coverage, desired cure temperature, and rate at which items are being screen printed, or coated with DTF adhesives.
The heater can be raised, lowered and pivoted using lock knobs on the sides of the heating chamber according to the thickness of printed garments and/or the angle of printed images on irregularly shaped items, for uniform curing of the printed area using minimum energy. Heater shields are included as standard to maximize edge-to-edge temperature consistency for increased image quality.
Dense coil pattern, heater shields and a 6.35 watt per sq in (0.98 watt per sq cm) infrared heater eliminate hot and cold spots and provide the power you need to get the job done.
| D-100 | |
| Heater Warranty | 15 Year |
| Defect Warranty | 3 Year |
| Shirts / Hr* Plastisol @ 25 secs |
110+@ 25 secs. |
| Shirts / Hr* - Waterbased/ Discharge | 50+@ 70 secs. |
| Shirts/hr* - DTG/digital | N/A |
| Time in Tunnel Range (mm:ss) | 00:17 - 01:20 |
| Belt Speed | 0.6 - 7.4 FPM (0.18 - 2.3 MPM) |
| Exhaust (Free Air) | 177 CFM (optional) |
| Exhaust Stack Diameter | 4” (10.16 cm) |
| Overall Length | 46" (117 cm) |
| Overall Width | 24" (61 cm) |
| Overall Height | 24" (61 cm) |
| Belt Width | 18" (45.7 cm) |
| Chamber Length | 18" (45.7 cm) |
| Chamber Infeed Width | 19.5" (49.5 cm) |
| Chamber Infeed Height (adjustable) | 2" - 7" (5 - 17.7 cm) |
| Heat Range (@ Heater) | 0-750 F° (0-399 C°) @ 120 or 240V |
| Heater Size & Standard Wattage** |
16"x16"(40.6x40.6 cm) |
| Cost / hour to operate based on 10 cents / kwh |
16 cents |
| Unit Weight | 89 lbs (41 kg) |
| Shipping Weight** | • Box 1 - 57 lbs (26 kg) • Box 2 - 16 lbs (7.3 kg) • Box 3 - 21 lbs (9.6 kg) • Boxes on skid - 115 lbs (52 kg) |
| Shipping Dimensions** | • Box #1 - 54” x 29” x 8” (138 x 74 x 21 cm) • Box #2 - 21” x 21” x 7” (53x53x18 cm) • Box #3 - 25” x 18” x 6” (64 x 46 x 15 cm) • On Skid - 60” x 32” x 22” (153 x 82 x 56 cm) |
| Electrical Specs** Chamber | • 120V / 12.5A / NEMA 5-15P |
| Electrical Connection | Cordset Included |
| Optional Power | 400V / 7A / 3 Ph. / 5 wire 50/60HZ |
*Production speeds are estimates are based on 16” centers and will vary depending on ink manufacturer, humidity of shop, and other variables.
All amps shown are FLA (Full Load Amps), not recommended line size! Dryers on this page must be hard wired to the power terminal provided. A licensed electrician must be consulted and should refer to articles, 210.20(a), 215.3 and 310 of the NEC code.
1 Year Warranty
Step 1: Design
Create your design using your choice of graphic design software.
Step 2: Print
Print white on top of colour, and then print you design onto the DTF transfer film.
Step 3: Apply
Apply adhesive powder onto the printed film, make sure that the powder sticks to the pattern evenly.
Step 4: Bake
Melt the powder onto the film using a heat press, oven, or heated shaker unit.
Step 5: Press
Press your design onto a substrate. Applicable on cotton, polyester, leather, cardboard, and other flat, rough and rigid materials.
Step 6: Finishing
Tear off the DTF film after pressing.
Advantages of DTF Printing:
- A great option for small orders.
- No cutting and weeding required.
- Crisp, defined edges and images from start to finish.
- Low cost on waste.
- Low investment - high reward.
Is the PTF-100 DTF Powder-To-Film Applicator and D-100 Dryer Combo right for you?
Enter your info below and a RB Digital sales representative will contact you about adding the PTF-100 DTF Powder-To-Film Applicator and D-100 Dryer Combo to your apparel decorating business.