NEW

RB Digital

SKU:

Regular price $400.00 CAD
Regular price Sale price $400.00 CAD
Sale Sold out
Shipping calculated at checkout.
Impress and excite your customers while growing your product line by printing on RB Onyx Metallic Gold DTF Special Effect Film. This film will make your designs pop with a metallic gold finish as it provides a shine that is smooth and glossy. 

You can print on RB Onyx Metallic Gold DTF Film directly with your existing DTF printer and DTF ink, without changing any consumable or DTF printer settings. This cold peel gold film works on T-shirts, bags, shoes, socks and other materials. It has high ink absorption, no ink-bleeding, is an easy cold peel, and high washability.

 

NOTE

  • DTF (Direct To Film) printing works with almost all types of fabrics including 100% polyester with excellent results!
  • Unlike DTG Printing, RB Onyx DTF Film does not require pre-treatment and also uses on average 75% less DTG ink to achieve good quality prints.
  • Final printed products have excellent wash durability, stretchability and close to no dye-migration
  • The transfer has a very soft hand feel.
  • The process is much faster than Vinyl printing as there is no weeding involved in this process.
Size

In stock

disabled
View full details

Often Purchased With

Printed Samples Using Metallic Gold Film

 

Note: The samples shown are for reference purposes only and may not accurately represent the gold film. Monitors and screens have variations in colour rendering which can affect the perceived effects. These pictures do not do the film justice and it is always recommended that you see the results for yourself.

 

  • Ink Chart

  • Ink Chart

  • Ink Chart

Additional Information

  • Cold Peel
  • Extra Ink Loading
  • Anti - Static Treated
  • No Oil from the Film
  • High Resolution
  • Gloss & Clean Finish
  • Print your image onto the DTF film. (View the examples of an all tan design vs. coloured design to get an idea of what your image will look like. To achieve an all gold look, it is recommended to make your base design a tan/beige colour. This will allow the metallic gold film to make that tan/beige design pop.)
  • Apply DTF powder – shake excess powder off – place in oven until powder is appropriately melted.
  • Choose your garment or fabric and place it on your heat press (temperatures and pressures may vary dependent on your fabric type) and press the printed film with the image side facing down between 10 to 15 seconds at 300°F.
  • Wait for the film to completely cool down before peeling, then in a very quick motion, rip the film off the fabric from side to side.
  • We suggest using a lint roller to remove any excess film that may be left on the fabric.
  • A 2-5 sec. press is sometimes recommended after you remove the film.
  • Keep out of direct sunlight
  • Avoid to use the film in high humidity (Recommended humidity : 50% below)
  • Keep dry
  • Do not use damaged film which could damage printers