Wilflex

K2200 Epic Polywhite LC Xtra

K2200 Epic Polywhite LC Xtra - 1 Gallon

SKU:

Prix habituel $185.00 CAD
Prix habituel Prix soldé $185.00 CAD
Vente Épuisé
Frais d'expédition calculés à l'étape de paiement.

Wilflex™ EPIC Polywhite LC Xtra is the best-in-class low bleed white with highest opacity rating in the Wilflex white’s portfolio. Printers easily achieve a full ink deposit and excellent coverage when using EPIC Polywhite LC Xtra. Recommend to cure at low temperature (270°F/132°C) on standard polyester and blends. It performs well on Polypropylene and Rayon at 250°F/121°C.

Format

In stock

disabled

Product Resources

Afficher tous les détails

Additional Information

  • High opacity, superior coverage, brilliant white
  • Low cure, save energy, reduce bleed defects
  • Superior stretch
  • Recommended for automatic presses
  • Excellent bleed resistance at a wide temperature range

Fabric Types

  • 100% polyester, triblends, polyester blends, cotton/poly blends

 

Mesh

  • Counts: 86-180 t/in (34-71 t/cm)
  • Tension: 25-35 n/cm

 

Squeegee

  • Durometer: 60/90/60, 70/90/70
  • Edge: Square, Sharp
  • Stroke: Hard flood, fast stroke
  • Angle: 10-15%
  • *Do not use excess squeegee pressure

 

Non-Phthalate Stencil

  • Direct: 2 over 2
  • Capillary/Thick Film: N/A
  • Off Contact: 1/16” (.2cm)
  • Emulsion Over Mesh: 15-20%

 

Flash & Cure Temperatures

  • Flash: 180°F (82°C)
  • Cure: 250°F (121°C) - 320°F (160°C)

 

Pigment Loading

  • EQ: N/A
  • MX: N/A
  • PC: N/A
  • *All percentages listed at % by weight.

 

Epic Additives

  • Extender: N/A
  • Reducer: Epic Viscosity Buster-1% max
  • *All percentages listed at % by weight

 

Shipping & Storage

  • 65-90°F (18-32°C)
  • Avoid direct sunlight.
  • Use within one year of receipt

 

Clean Up

  • Ink degradent or press wash
  • Stir inks before printing
  • Use consistent, high-tensioned screen mesh and sharp edged squeegees for best print results
  • Use a printing technique to assure a good ink deposit to maximize bleed resistance and film strength properties
  • POLYWHITE LC XTRA is a full-bodied ink with moderate print stroke speeds. Use hard flood and medium-high squeegee pressures
  • POLYWHITE LC XTRA is a low bleed ink. For challenging fabrics using sublimation dyes, a bleed blocking underbase such as EPIC Armor LC Gray or Black is required
  • Adjust flash cure temperature and dwell time so ink is just dry to touch. Depending on flash unit, a 2 - 3 second flash is adequate.
  • Curing is a time and temperature process, a lower oven temperature setting with a slower belt speed while maintaining recommended ink cure temperature is always best to protect fabric, control dye migration and reduce energy consumption
  • POLYWHITE LC XTRA can be cured between 270°F - 320°F (138°C - 160°C). Running at the higher end of the temperature range and/or longer dwell times maybe required to achieve proper cure on jobs that contain cotton, high ink deposits or heavy weight garments. It is recommended to cure POLYWHITE LC XTRA at 250°F (121°C) when printing on Rayon and Polypropylene.
  • Suitable for use as an underbase flash white or as a hi-lite white
  • Stir plastisols before printing.
  • Do not dry clean, bleach or iron printed area.
  • Perform fusion tests before production. Failure to cure ink properly can result in poor wash fastness, inferior adhesion and unacceptable durability. Gel and cure temperatures for ink should be measured using a Thermoprobe device placed directly in the wet ink film and verified on the substrate(s) and equipment to be used for production.
  • It is the responsibility of the printer to determine that the correct ink has been selected for a specific substrate and the application processes meet the printer’s customer standards or specifications.
  • Curing is the responsibility of each printer to confirm that the print is fully cured. PolyOne’s cure recommendations are not a guarantee or warranty, but merely suggested starting points for curing evaluations as explained above.
  • When printing on garments that contain certain dyes, you must pre-test for the potential ghosting. Please refer to our website for more information on this issue.
  • Wilflex products have been carefully designed to perform within a given viscosity range, and any dramatic change in viscosity is probable to result in a change in printing characteristics
  • NON-CONTAMINATION OF EPIC INKS: Do not mix EPIC inks with inks, additives or extenders from other companies. All buckets, palette knives, stirring apparatus, squeegees, flood bars and screens must be cleaned properly and free of phthalates and pvc containing inks. Non-phthalate emulsions and pallet adhesives must be used. Failure to follow these precautions may cause phthalate contamination in violation of consumer protection laws and regulations.
  • Any application not referred in this product information bulletin should be pre-tested or consultation sought with Wilflex Technical Services Department prior to printing.